Sher III Feathers

Welcome To Feather In The Spirit Wind

Home
Contact Sher
Sher's Shows '2012'
Decorated Dry Gourds
Leather Bags & Pouches
Jewelry Sets
Necklaces
Beaded Bracelets & Cuffs
Pendants Pins Belt Buckle
Rings
Earrings
Fetishes
Dream Catchers
Medicine Wheels
Mandellas
Sheilds
Antler Items
Knives
Peace Pipes & Tomahawks
Breast Plates
Burden Baskets
Prayer, Dance & Smudge Fans
Miscellaneous Items
Fun Pictures @ Camp Shows
Arts & Craft Show Pic's
                                                        
 
 
                                                     Antler Handle Feather Knife
 
This is a great knife especially for you knife collectors out there. The beautifully carved feather was done by a very well known artist Jack Brown of "Stones & Bones". I bought this from him with intension's of using it as a cane handle but when I put this hand made blade up to it, that's all it took. It turned out great, don't ya think?? The rosette makes for a nice guard. The stand is a piece of moose antler. I have burned both the handle and the stand to give a bit of color & definition. It has been buffed out for a very nice shine. I can't imagine anyone being unhappy with this beauty!!
The handle measures 6" by 1 1/2 at the feathers widest point. The blade is 4" by 1". Base about 1 1/2.
 
 
Price: $105.00  Sold
 

 
 
                         
 
                      Antler Handle, Obsidian Knapped Blade Carved Stag Head Knife
 
Another Great Knife!! This handle has a deer carved into it. It is highlighted with some black stain & torched for a brown edge. The blade is a wonderful hand knapped blade in obsidian. It is 6" long & the antler handle is 7 3/4" long making the total length 13 3/4" long. I have added a brass strip & dark wood to the base of the blade & handle...Real sharp looking. The antler base comes with it. I have groved & rubberized that area of the antler base so not to harm the delicate blade. Knife looks very cool in the base.
 
                                  
 
 
Price: $149.00
 

  

 
Damascus Blade, Antler & Horn Bowie Knife
 
This blade is beautiful! The lower picture shows it best. The handle is carved hard brown antler. The end has a piece of buffalo horn attached with 5 brass pins. The guard is steer horn. The sheath is a heavy cowhide center wrapped with black buckskin & real python snake. The blade is about 4 1/2" & the handle is 4 1/2". The sheath will take up to a 3" wide belt. Very well balanced cool knife! I am very happy with the way it turned out...think you would agree!
 
Price: $189.00 Sold
 
 
 
 

 

 

 

            Wood Eagle

             Knife with

            Snake Skin  

               Sheath

 

This is a great neck knife. The knife was made by "Pappy" He is a very experienced older fella at what is does & a nice guy also. The handle is a dark wood & there is a metal feather inlaid on each side.

I made the snake skin sheath to go with it. I bought the skin years ago & do not know what kind of snake it is. Anyone out there, please email me if you should happen to know...Thanks. The neck strap is a darker brown braided sinew.

Measures 6 1/4" long and 1" wide. Strap is 28".

 

Price: $59.00 Sold

 


 

Carved Wart Hog Tusk & Stone Blade Knife

 

I, myself, really love this one! The colors are so good together. The wart hog tusk was carved by D J W Kelsey a very good female carver of antler, tusk & other items. I then made it into a knife. The two woods are Bocote (dark) and Cinnamon Burl (light). The blade is a very nice color Texas flint. The sheath is a heavy cowhide center with a softer vegetable tanned cowhide cover. It will hold up to a 4" belt. Very, very cool knife! The handle is about 5" & the blade is also 5". Another well balanced knife & a one of a kind!

 

Price: $165.00 Sold

 


 

 

  

 

       Another Great Jeff II Hawks Bone Knife

 

This nice belt knife is made out if a deer shin bone with a black horn guard & a silver tack in the top. The sheath is a heavy natural color leather that has been painted in the burnt in design lines. There is also red trade wool cloth stitched into it along with brass & glass beads. I love the sheathes this guy makes! Knife is 9 1/4", Blade 4 1/2", knife in sheath about 14 1/2"

Blade is guaranteed to rust! Rustic!

 

Price: $98.00

 

       

 

                         

 


 

 

       Carved Antler & Damascus Blade Knife

 

This is a team effort knife as are many of my knives. A great carver "Bonecarver" did this antler handle with two feathers carved in and a real piece of turquoise inlaid on the end. It measures 6". The damascus blade I can not elaborate on much but it is a real nice handmade 5 3/4" of fine quality for sure! I have made the two up into a 12" knife with a steer horn guard along with a hint of cinnamon burl wood. The small antler stand goes with it. I may make a sheath for it down the road if it is still around.

 

Price: $185.00 Sold

 


 

   

                           

 

                          Carved Antler Belt Knife

 

Yet another wonderful creation from Jeff II Hawks! As you can probably tell by now I just love his work. This is a pretty large knife the handle with carved feathers & 1/2 of a medicine shield is 4 1/2". It has two black horn spacers along with a brass one. The guard is antler & the top has a hard antler piece added with 4 brass pins. The blade is from a 2 man steel logging saw & is a tad over 5". The sheath is adorned with glass beads & brass cones. The overall length is 13".

 

Price: $165.00

 

 

 

     Carved Eagle Out Of Wart Hog Tusk Knife

 

This is a great looking knife! I have not decided on making a sheath or not so will start without one. This was put together by me, Sher & the carving was done by DJW Kelsey-Great Carver! I have walnut wood & a taguanut guard on it. Blade is 4" & handle 3" or about 6" if you measure curve.

 

Knife: $149.00 Sold

 

Antler for stand: $12.00

 


 

 

 

 

           Carved Bear Into Warthog Tusk

                   Herder Carving Knife

 

This is another great carving done by DJW Kelsey. She does super nice work. I was going to use as a cane handle but I had two big blade to use & this fit this Herder (made in Germany)7 1/2" blade real well. It looks like cinnamon burl wood that I have knotched out to work as a guard. Great knife to show of at a dinner party when serving up the meat! The handle is about 5" & the total length of the knife is 1 foot. Antler stand not included.

 

Price: $169.00

 


 

 

 

             Bear Carvings In Warthog Tusk

                           Herder Knife

 

This is yet another wonderful DJW Kelsey carving of a bear head & a full bear carved in the side of the warthog tusk. This was another one that was going to be a cane handle but I used the other large blade I had for it & it works perfect. It is a Herder 9 1/4" blade made in Solingen Germany. The total length of the knife is 15". I am not sure what kind of wood is between the blade & the warthog. It is a very dark brown...probably walnut? Another show piece knife!

 

Price: $169.00 Sold

 


 

            

                                

 

                Jeff II Hawks Steer Horn Belt Knife

 

This is a little different from Jeff's carved antler & bone knives but very likable as are his carved handles. There is pewter on the top & down by the blade. The guard is a piece of antler. The knife is 9 3/4" made from a 2 man steel logging saw. The blade is 5" & the overall length in the sheath is 12". There are coyote claws, glass & brass beads hanging on the sheath. Really, Really nice!

 

Price: $138.00

 


 

                  

 

                        

 

                      Antler & Steer Horn Belt Knife

 

Jeff II Hawks has done it again! Here is a carved steer horn handle that has antler top & guard piece. There is a single feather on one side & a morning star on the other. The blade is made from an old steel logging saw (very rustic). It is 4". With the handle it is 7 1/2" & the overall length in the rawhide shield is about 11". It has brass cones, glass beads & copper beads. Nice!

 

Price: $135.00

 


 

 

 

 

 

                   

 

                     Jeff II Hawk Carved Knife

 

Jeff II Hawks carved out this knife handle that I have since made into a great knife. The carvings are of 3 wolfes two on the end & one on the side. There is also a small eagle & 6 feathers carved all in this deer antler piece. This is set with a skinner type 6 1/4" blade with a brass guard. The total length of the knife is 12 1/2". I plan on making a sheath if I don't sell it first without it. Sharp looking knife!

 

Price: $159.00 Sold 

 


 

  

 

          Jeff II Hawks Coyote Jaw Belt Knife

 

I am putting up some of the last Jeff II Hawks knives I  have. Many have contacted me on his whereabouts. Nowbody seems to know. So that being said...These may become collector items. If your out there Jeff please let me know you are well. This large coyote jaw knife comes with the sheath. The length of the knife is 9" the jaw 4 1/2" & the very rustic blade 4 1/2". The sheath is 10" long & 13 1/2" long with the knife in it. The design is wood burned & painted on the sheath. The desige in the knife is cut into the bone.

 

Price: $95.00 Sold

 


   

          

 

                 

 

         Jeff II Hawks Carved Antler Belt Knife

 

This is a very nice belt knife. The 4 1/8" antler handle has a bear, bear paw & 6 feathers carved into it. There are two brass pins in the top. The blade is 3 7/8" long. Total length is 7 7/8". The length with the sheath is 12". Nice job Jeff!!! I'm sure this one won't last long!

 

Price: $155.00


 

        

 

        Jeff II Hawks Carved Antler Belt Knife

 

Here is another nice Jeff II Hawks knife. This one has a swirl design carved into the antler & around the top (the rosette) are 3 oak leaves carved out. The antler is 4" The blade 3"...Total 7" long. The sheath is 8" & 9 1/2" with the knife in it. It also has the burned in design & then painted.

 

Price: $89.00

 


 

       

 

        Jeff II Hawks Carved Deer Antler Knife

 

This is a great neck knife with a cut out Brass Beaver attatched to the front of the two tone leather sheath. It is a neck knife with brass & green glass beads. The knife has two carved feathers & on the top of the rosette a medicine wheel. The antler is 3 1/2" & the blade is a tad over 2 1/2" so overall about 6" long.

 

Price: $93.00

 


 

                         

 

           

 

               Colorful Beaded Knife Sheath

                      With Primitive Knife

 

Here are two real nicely beaded knife sheaths. The inside has a strong leather lining while the outside has a nice soft brain tanned leather with some fringe. They measure 9" not including the ajustable neck strap that is about an extra 20". The knife comes with each of these The have a dark wood handle that is pinned with copper 3 times. the wood measures 3 1/4" & the rustic blade is 3 1/2" for a total of 6 3/4". 

 

Price: $49.00 each

 


 

            

     

 

          Antler Horse Knife By Jeff II Hawks

 

If you are a horse lover this may be for you! There are four horses carved around this real nice antler handle knife. The top has a piece added that has two brass pins. the length of the handle is 5". The blade is also 5" so it is a 10" knife. It is about 14" with the gold, white & blue painted sheath. The design is burned into the rawhide then painted in so it has texture as are all his sheaths. The beads are blue & yellow along with some gold cones.

 

Price: $159.00 Sold

 


 

            Carved Eagle In Antler Neck Knife

 

Yet another great creation by artist Jeff II Hawks. This is a small neck knife. Nicely painted & wood burned knife sheath. Has a great looking eagle carved into the antler handle along with several feathers. It is a 5 3/4" long knife. The total length in sheath, not including the hang strap is 11 1/2". Brass beads & cones along with glass beads in yellow, dark blue & turquoise.

 

Price $95.00

 

                              

 

                 

 


 

 

 

 

 

 

 

    Antler Eagle Knife With   

        Snake Skin Sheath

 

Another knife made by Pappy. It is antler with his trademark metal feather inlaid in the antler. I have burned a little bit around the head to bring out the detail. I made this sheath also. This skin is python & the neck strap is a darker brown braided sinew.

Measures 4" long and 1" wide. Neck strap is 24". 

 

Price: $48.00 Sold

 

 

 


 

         

 

             Wood Eagle Neck Knife

 

Here is yet another Pappy Knife! Since the others were sold I got another one up. It is a dark wood with a metal feather inlay on both sides. The sheath is heavy leather with fringe & sinew wrap. The strap is a round braid like a bolo tie only thinner. The knife is 5 1/4" long (sheath 5 3/4"). The strap is 25". Not to many of these around. Pappy has retired so I hear.

 

Price: $65.00 

                   

 


 

               

     

 

                   Primitive Belt Knife

 

This knife is made by Jeff II Hawks. Great for period dress or display. It is a nice piece of deer antler with 8 carved feathers around it. The top & a small piece next to the guard is buffalo horn. The top is pinned with two brass pieces that you can't see in the pictures well. Blade is 3 1/2" & antler about 4 1/4". Total length is about 7 3/4. The knife in the sheath is 13" long. It has small red white heart glass beads along with a yellow stripe bead & brass cones.

 

Price: $130.00 


 

 

 

     Jeff II Hawks Carved Badger Jaw

                        Neck Knife

 

This jaw is a bit bigger than the above weasle jaw. It is 5" total length. The design/feather is carved into the jaw. It is a very rustic 2 1/2" blade. The length up to the top of the beads on the neck strap is 11". Nice!

 

Price: $79.00

 


         

 

 

 

      

 

       Carved Feather Antler Handle

                         Belt Knive

 

Wonderful knife by Jeff II Hawks. Lots of carving on this one. There are many feathers all around the handle & the top rosette has a morning star. There are two copper spacers & one black buffalo horn spacer. The blade is made of an old steel spring saw. It is 5 1/4" long & the knife is about 9 1/2". The total length in the sheath is about 12".

 

Price: $129.00

 


 

                

 

              Antler & Amber Small 

           Flint Knapped Neck Knife

 

This has a real amber cabochon on the end along with amber glass & antler beads. It is on a brain tan cord that is adjustable. Knife is 3 1/4" long & 1 1/4" wide.

 

Price: $38.00 Sold

 


 

           

 

     

                 

 

         Feather Carved Antler Knife

 

I bought this antler knife handle from Jeff II Hawks & have made it into a knife with walnut wood & brass. The sides are all done up in carved feathers & the top is the four corners or medicine wheel design. After I made this up I could not decide if I wanted to make a sheath or a stand. Then it hit me I have some of Jeff II Hawks carved antlers on a stand. I held it up to one of them & this one looks like it was made for it. I am selling them separate though if you prefer one or the other. The stand is also listed on the antler items page. The blade is 4 1/4" & total length w/antler is 9". Very special set I think!

 

Knife: $95.00 Sold

 

Stand: $59.00 Sold

 


 

                      

 

 

 

 

          Jeff II Hawks Carved Antler

              & Pipestone Belt Knife

 

Very nicely done antler handle knife by Jeff II Hawks. There is a wolf head carving protruding from the side that fits the hand nice. There is a pipestone wolf track inlaid in the rosette. The blade is made out of an old steel spring saw. It is 6" long. The knife is about 10 3/4" & in the sheath will be about 12". The sheath has brass cone along with brass & glass beads & two coyote claws.

 

Price: $148.00

 


 

 

 

  

                  

 

      Non Tipical Antler Knife & Eagle

                 Carved Antler Stand

 

This is a very cool non tipical antler knife I made up that can be bought with or without the also very cool antler stand that two eagles have been carved into the tips. They have real glass eyes. The stand was made by Gary Akers a wonderful artist of antler & wart hog carved eagle heads. I am so glad I found him & he has agreed to work together on some future creations! The knife has steer horn & brass accents. This knife fits into a small mans or a womans hand. You can see in picture above how the hand fits around the non tipical tips. I only show right hand but left hand fits nice also. The blade is just about 3" & total length with antler is 7". The stand is 6 3/4" long, 5" wide & 5 1/2" tall.

 

Knife: $75.00 Sold

 

Stand: $59.00 

 


 

 

 

             Neat Little Skinner Type

              Damascus Blade Knife

 

The handle of this knife is warthog tusk where an eagle has been carved into it & I have set in glass eyes. There is a cinnamon burl spacer & shaved down brass guard made to fit the warthog tusk base. The

2 3/4 damascus blade is beautiful. The total length of the knife is a little over 5 1/2". Neat little knife. I may make a sheath for it one day or if requested.

 

 

Price $179.00 Sold

 


 

 

  

 

    Jeff II Hawks Carved Antler Feathers

                          Belt Knife

 

This great belt knife has eight feathers carved around it. The top has the four corners carved in. There is a black horn spacer along with 2 copper then an antler guard. the blade is 4 3/4". The handle 5 1/2". The total length in the sheath is 14 1/2". There are brass cones along with glass beads and two coyote claws on the sheath. The claws are hung in the center of the sheath that has a red wool insert.

 

Price: $159.00

 


 

     

 

             Nice Antler Skinner Knife

 

This skinner knife I have made out of a nice two tine real antler tip. Nice all natural color to it also. the blade is made to look like damacus. I have added a piece of oak & walnut wood at the base of the blade & antler. Sharp looking & fits in hand nice. The blade length is 4" & total length is 9 3/4".

 

Price: $75.00 Sold 

 


 

          

 

   

 

        Jeff II Hawks Carved Antler 

                        Neck Knife

 

Yet another Jeff II Hawks Knife. I went crazy on this wonderful artist. This Knife has has two great looking feathers carved into it along with a neat bear paw that runs along the top (feathers are underneath). The top of the handle has two brass pins for looks. The antler handle is 3 1/4"" & the rustic blade is 3 1/4" for a total of a 6 1/2" knife. The knife in the sheaths total length is 11 1/2" not including the neck strap. Beads are brass & yellow glass.

 

Price: $95.00 


 

 

 

Jeff II Hawks Carved Coyote Jaw Knife

 

This knife has the design on both side of the coyote jaw. It is a medicine wheel top that wraps around with a feather on each side. The jaw is 4" & the rustic blade another 4"...8" in all. Knife in the sheath measures 11 1/2" not including the neck strap. The design is  lightly burnt into the leather & painted.

 

Price: $94.00 Sold

 


 

              

 

        

 

           Antler Carved Jeff II Hawks

                          Neck Knife

 

Yet another wonderful Jeff II Hawks creation. Never a disapointment. This one has an eagle & four feathers carved around the antler handle. The top has an added antler piece that has two brass pins. The blade area has a wood insert before the antler guard. the antler measures 3 1/2" & the blade 3 1/4" making it 6 3/4" long. In the sheath the total length with fringe is 12" not including the neck strap. Beads on sheath are yellow & red glass with copperish brass cones.

 

Price: $94.00

 


 

 

 

            Jeff II Hawks Neck Knife

 

This ia a great looking antler & steer horn knife. The base & the crown both have a dark brown horn piece added in. The crown has two brass pins. The antler has 2 wolf tracks along with 6 wolfs carved around it. The handle is 3 9/16". The blade 3" & overall length with the sheath is about 10". The blade is from an old steel 2 man logging saw. The sheath is done in several colors of glass beads, two shades of blue, white & yellow. It also has brass beads, cones & 4 coyote claws! Signed II Hawks. Real nice!

 

Price: $128.00 Sold

 


 

      

     

 

   More Jeff II Hawks-Antler Neck Knife

 

I went crazy on my friend Jeff Two Hawks items. I lost him there for a while but he's back & even better than ever! This is a nice little neck knife. It has feathers carved in all the way around the antler handle. The top has a morning star. down at the base there is a copper spacer that looks real cool. the knife blade is from an old steel 2 blade saw. The beads are red & yellow glass along with rusty tin cones. The blade is just shy of 3" & the handle is a tad over 3" making it a 6" knife. It measures about 11" in the sheath.

 

Price: $95.00

 


 

        

 

                          

 

        Four Wolfs Carved Around Antler Knife Handle

 

This wonderful neck knife has FOUR wolfes carved into the handle. It is a real piece of art. The blade is made out of an old spring steel logging saw & is 3 1/2" long. The total knife length is 6 1/2" & the length in the sheath including the fringe is about 11". The beads on the sheath are glass, brass & copper tipped with four coyote claws.

 

Price: $120.00